The heat pipe series solar collectors are always connected with existing heating supply device(s). The selective coating on the inner cover or the evacuated tubes converts solar energy into heat energy and transfers heat to the heat pipes by Aluminum fins. The liquid in the heat pipe changes into vapor which rises to the condenser (storage tank). The heat conducts to the heat transfer liquid (anti-freezing liquid or water) via a copper pipe. This transference of heat in the liquid creates a continuous and unaided circulation as long as the collector has access to the sun.

Solar Collector Characteristics

1. All the pipeline is made of red copper and conducted by heat transfer medium liquid. With the heat pipe in the vacuum tube, so no water will flow in the vacuum tube
2. The manifold uses aluminum alloy for the exterior, and red copper for the interior, also with fashion design.
3. EN12975 Solar Thermal Collector Withstand high pressure when it is working
4. It can be combined arbitrarily to meet the demand of large water consumption, and also could be combined with the existing pipeline
5. Each tube can work alone so that the solar collector can work even one tube is broken and easy to change if necessary
6. This model Solar Collector is En12975 Approved with Solar Keymark Certificate

Espesipikasyon

• Manifold(interior): Red copper
• Manifold(exterior): Aluminum alloy
• Aluminum fin: 1600 mm full length
• Heat Pipe: Red copper
• Heat insulation layer: Eco-friendly Rockwool 35mm
• Vacuum tube: 58*1800mm, SS-CU-AIN/ALN coating
• Bracket: Aluminum alloy, 20-45 degree
• Hail resistance: 25mm
• Max pressure: 6 bar
• Anti-freezing: > -35 Degree
• Daily efficiency: ≥ 55%